MikroTik 12POW150 Hot Swap power supply for CCR1072

CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies – if one of them goes out of order, the second one will take over.

Hot-Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router

MikroTik 24HPOW 24V 2.5A adapter

High power 24V 2.5A power supply + power plug.

Recommended for long cable runs with several high power wireless cards.

MikroTik 48POW 48V 1.46A 70W power adapter

48V 1.46A 70W Power Adapter + Power plug

MikroTik 48V2A96W 48 V 2 A 96 W power supply with plug

48 V 2 A 96 W power supply, to be used with our products that support 48 V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48 V 1.46 A 70 W), allowing more power per port.

Comes with the power plug of your choice (EU, US or UK version).

MikroTik CWDM-CHASSIS-2 1U Chassis bracket for CWDM MUX/DEMUX

1U Chassis bracket that can hold two CWDM-MUX8A units

MikroTik GB60A-S12 12V 5A internal power supply for CCR1016 series

12V 5A internal power supply for CCR1016 series (only for new r2 revisions, with dual power supplies) and CCR2004 series

MikroTik GPEN21 Smart power injector that serves as an advanced software-controlled repeater

The GPEN21 is a smart power injector that serves as an advanced software-controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features:

• Interface management and monitoring

• GPEN link fault detection

• VLAN support

• SNMP reporting

• Basic traffic shaping

GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider, or to provide PoE to power Ethernet uplink to provider (that uses our GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall, as preferred.

MikroTik LHG mount Basic pole mount adapter for LHG series, made from metal

MikroTik MQS Mobile Quick Setup – system administrator’s best friend

If you work with many PoE powered devices and manage their configuration and diagnostics, this small device fits in your pocket will make your life so much easier! The MQS is a tool that lets you manage MikroTik and other devices (including Ethernet-only!) from your smartphone over a Wi-Fi connection!

MQS can be powered from a power bank or a USB charger. It has PoE out to power your devices – you don’t even need electricity on-site to perform maintenance, diagnostics or Netinstall!

No more climbing and balancing towers with unwieldy laptops – just carry an MQS in your pocket for safe and simple work anywhere! Unplug the PoE cable from your CPE device, attach the MQS and it will allow you to connect wirelessly and apply basic settings, working as a WiFi to Ethernet bridge with PoE output.

MikroTik PW48V-12V150W Hot Swap -48V DC telecom power supply for CCR1072. Supported input Voltage -36 .. -57V.

MikroTik is now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations – simple and easy. You don’t even need to turn off the device. Supports Voltage -36 .. -57V

MikroTik RBFTC11 Fiber to Copper converter, Outdoor case, 12-57V PoE with 802.3af/at support

The FTC is a simple Fiber to Copper converter. Unlike many other media converters available on market, it has an outdoor waterproof case with a lock screw, it’s mounting bracket can be attached and locked with a screw from inside the case. The unit has 12-57V PoE with 802.3af/at support (with unshielded cross cable). Comes with PoE injector and power supply. Works only with Gigabit SFP connections.

MikroTik RBGPOE-CON-HP 48 to 24V 10/100/1000Mbps PoE converter 802.3af support, 802.3at PoE plus support

MikroTik UP1302C-12 12V 10.8A internal power supply for CCR1036 series

12V 10.8A internal power supply for CCR1036 series (only for new r2 revisions with dual power supplies)

MikroTik UP1302C-12 12V 10.8A internal power supply for CCR1036 series

12V 10.8A internal power supply for CCR1036 series (only for new r2 revisions with dual power supplies)

MikroTik ACSWIM 2.4/5Ghz Omni antenna, 4dBi gain, MMCX connector

MikroTik ACSWIM 2.4/5Ghz Omni antenna, 4dBi gain, MMCX connector