MikroTik netPower 15FR (CRS318-1Fi-15Fr-2S-OUT) Outdoor 18 Port Switch with 15 reverse PoE Ports and SFP

AED 1,250AED 1,300 (-4%)

In stock

MikroTik Switches netPower 15FR An outdoor 18 port switch with 15 reverse PoE ports and SFP. Cut costs, not speed – choose GPEN over GPON!

With netPower 15FR switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.

You don’t have to worry about power options in the attic or the utility room – netPower 15FR has 15 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 15 can power other PoE capable devices with the same voltage as applied to the unit.

There are two SFP ports for fiber connectivity. The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower 15FR – bringing the cost down and the speed up!

netPower 15FR has a non-blocking throughput of 3.6 Gbps, switching capacity of 7.2 Gbps and forwarding rate of 5.4 Mpps.

The power supply is NOT included with the product- must be purchased separately.

Compare
Details
Product code CRS318-1Fi-15Fr-2S-OUT
Architecture ARM 32bit
CPU 98DX224S
CPU core count 1
CPU nominal frequency 800 MHz
Dimensions 304 x 212 x 71 mm
License level 5
Operating System SwOS / RouterOS (Dual boot)
Size of RAM 256 MB
Storage size 16 MB
Storage type FLASH
Tested ambient temperature -40°C to 70°C

Powering

Details
PoE in Passive PoE
PoE in input Voltage 18-57 V (recommended 36-57V)
Number of DC inputs 16 (DC jack, PoE-IN)
DC jack input Voltage 18-57 V
Max power consumption 29 W
Max power consumption without attachments 10 W

PoE-out

Details
PoE-out ports Ether15
PoE out Passive PoE
Max out per port output (input < 30 V) 0.75 A
Max out per port output (input > 30 V) 0.5 A
Max total out (A) 0.75 A

Ethernet

Details
10/100 Ethernet ports 16

Fiber

Details
SFP ports 2

Other

Details
CPU temperature monitor Yes
Voltage Monitor Yes

Certification & Approvals

Details
Certification CE/RED, EAC, ROHS

Switching results

CRS318-1Fi-15Fr-2S-OUT
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Switching Non blocking Layer 2 throughput 292.6 3,553.2 845.9 3,464.7 5,357.1 2,742.9
Switching Non blocking Layer 2 capacity 292.6 7,106.4 845.9 6,929.3 5,357.1 5,485.7
Switching Non blocking Layer 1 throughput 292.6 3,600.0 845.9 3,600.0 5,357.1 3,600.0
Switching Non blocking Layer 1 capacity 292.6 7,200.0 845.9 7,200.0 5,357.1 7,200.0

Ethernet test results

CRS318-1Fi-15Fr-2S-OUT 98DX3224 all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 104.4 1267.8 199.4 816.7 169.4 86.7
Bridging 25 bridge filter rules 61.7 749.3 62.0 254.0 75.7 38.8
Routing none (fast path) 104.4 1267.8 117.8 482.5 138.3 70.8
Routing 25 simple queues 78.8 956.9 77.0 315.4 97.0 49.7
Routing 25 ip filter rules 44.7 542.8 45.1 184.7 52.4 26.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Be the first to review “MikroTik netPower 15FR (CRS318-1Fi-15Fr-2S-OUT) Outdoor 18 Port Switch with 15 reverse PoE Ports and SFP”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu